• TRUDESIGN

    TRUDESIGNKeep boats smelling clean and pleasant. Lets only freshened air out the vent. Installs easily between holding tank and through-hull vent to absorb tank odours.Universal hose connector for 3/4" and 1" (20 mm and 25 mm) incl. mounting brackets

    K8 > Luftfilter > TRUDESIGN

    https://www.lindemann-kg.de/en/products/8/Luftfilter/TRUDESIGN#66

  • TRUDESIGN

    TRUDESIGNThe reinforced nylon 6 hose clamps eliminate the problem of the often sharp-edged hose clamps. The fasteners are made of 316 stainless steel to ensure long life.

    K8 > Schlauchschellen > TRUDESIGN

    https://www.lindemann-kg.de/en/products/8/Schlauchschellen/TRUDESIGN#273

  • vent loops

    TRUDESIGN vented loops for on-board toilets below the waterline

    K8 > Schwanenhalsventil > Schwanenhalsventil TRUDESIGN

    https://www.lindemann-kg.de/en/products/8/Schwanenhalsventil/Schwanenhalsventil%20TRUDESIGN#147

  • TRUDESIGN Mounting bracket

    TRUDESIGN Mounting bracket for Ball valves, black

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20Montagebügel#1480

  • TRUDESIGN Compact

    TRUDESIGN Ball valves with blue handle, made of plastics.Certificated by Bureau Veritas

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20Kompakt#742

  • TRUDESIGN 90°

    TRUDESIGN hose nipples, 90° angle with outside thread, made of black plastic material, Compact Design

    K8 > Schlauchtüllen - Kontermutter > Schlauchtüllen

    https://www.lindemann-kg.de/en/products/8/Schlauchtüllen%20-%20Kontermutter/Schlauchtüllen/TRUDESIGN%2090°#745

  • TRUDESIGN electronic

    TRUDESIGN Ball valves with blue handle, made of plastics - for electronic position monitoring. Delivered WITHOUT monitor

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20elektronisch#425

  • TRUDESIGN electronic

    Spanner for TRUDESIGN Ball valves

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20elektronisch#429

  • TRUDESIGN Handle Tags

    Large TRUDESIGN Ball Valve handle tags for standard handlesFits for sizes: 1-1/4" / 1-1/2" und 2"

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20Kennzeichner#602

  • TRUDESIGN T-Handle

    TRUDESIGN Ball valves with blue T-handle, made of plastics.Can be secured against accidental opening with a padlock.Certificated by Bureau Veritas

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20T-Handle#423

  • Spray Nozzles TRUDESIGN

    TRUDESIGN Hand spray nozzle made of Nylon6 and a flow rate up to 42 Litres per minute. With the optional tail snap hose adaptor attachable to hose quick connectors.

    K8 > Pumpenset > Sprühdüsen

    https://www.lindemann-kg.de/en/products/8/Pumpenset/Sprühdüsen/Sprühdüsen%20TRUDESIGN#283

  • TRUDESIGN with hose connector

    TRUDESIGN Skin fitting, Composite resin with hose connector acc. to ISO9093-2

    K8 > Borddurchbrüche > Kompositkunststoff nach ISO9093-2

    https://www.lindemann-kg.de/en/products/8/Borddurchbrüche/Kompositkunststoff%20nach%20ISO9093-2/TRUDESIGN%20mit%20Schlauchanschluss#445

  • TRUDESIGN with integrated scoop strainer

    TRUDESIGN Composite resin with integrated scoop strainers

    K8 > Borddurchbrüche > Kompositkunststoff nach ISO9093-2

    https://www.lindemann-kg.de/en/products/8/Borddurchbrüche/Kompositkunststoff%20nach%20ISO9093-2/TRUDESIGN%20mit%20integriertem%20Ansaugsieb#1478

  • TRUDESIGN 90°

    TRUDESIGN hose nipples, 90° angle with outside thread, made of black plastic material

    K8 > Schlauchtüllen - Kontermutter > Schlauchtüllen

    https://www.lindemann-kg.de/en/products/8/Schlauchtüllen%20-%20Kontermutter/Schlauchtüllen/TRUDESIGN%2090°#613

  • TRUDESIGN Handle Tags

    Small TRUDESIGN Ball Valve handle tags for standard handlesFits for sizes: 1/2" / 3/4" / 1"

    K8 > Ventile - T-Verbinder > Kugelhahn 2-Wege

    https://www.lindemann-kg.de/en/products/8/Ventile%20-%20T-Verbinder/Kugelhahn%202-Wege/TRUDESIGN%20Kennzeichner#603

  • TRUDESIGN flat outside

    Laminating aid for flat, papered TRUDESIGN Skin fittings

    K8 > Borddurchbrüche > Kompositkunststoff nach ISO9093-2

    https://www.lindemann-kg.de/en/products/8/Borddurchbrüche/Kompositkunststoff%20nach%20ISO9093-2/TRUDESIGN%20Konisch%20flach#440

  • TRUDESIGN Scoop strainers

    TRUDESIGN Composite resin scoop strainers for skin fittings

    K8 > Borddurchbrüche > Kompositkunststoff nach ISO9093-2

    https://www.lindemann-kg.de/en/products/8/Borddurchbrüche/Kompositkunststoff%20nach%20ISO9093-2/TRUDESIGN%20Ansaugsiebe#448

  • TRUDESIGN flat outside

    TRUDESIGN Skin fitting, Composite resin with full length thread, flat outsideCertificated by Bureau Veritas

    K8 > Borddurchbrüche > Kompositkunststoff nach ISO9093-2

    https://www.lindemann-kg.de/en/products/8/Borddurchbrüche/Kompositkunststoff%20nach%20ISO9093-2/TRUDESIGN%20Konisch%20flach#438

  • TRUDESIGN installation tool

    Installation tool for TRUDESIGN skin fittings

    K8 > Borddurchbrüche > Kompositkunststoff nach ISO9093-2

    https://www.lindemann-kg.de/en/products/8/Borddurchbrüche/Kompositkunststoff%20nach%20ISO9093-2/TRUDESIGN%20Montageschlüssel#451

  • TRUDESIGN 90 degree angle

    TRUDESIGN hose nipples, 90° angle with inside thread; made of black plastic material

    K8 > Schlauchtüllen - Kontermutter > Schlauchtüllen mit Innengewinde

    https://www.lindemann-kg.de/en/products/8/Schlauchtüllen%20-%20Kontermutter/Schlauchtüllen%20mit%20Innengewinde/TRUDESIGN%2090%20Grad#221

Results 1 - 61 of 61

Product News